Filter
Top Products
7
TV
DVD
VCR
CD
DVD
TV
OUT IN
LEFT
RIGHT
AUDIO
LEFT
RIGHT
LINE OUT
LEFT
RIGHT
FRONT/MIX
AUDIO OUT
LEFT
RIGHT
AUDIO OUT
COAXIAL
DIGITAL OUT
A
B
C
OPTICAL
DIGITAL OUT
Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the terminal names actually printed
on the rear vary among the components.
• Connect the video input directly to the video
output on the DVD player and/or VCR.
• You can also connect the digital TV tuner using
the optical digital cable (see above).
Connect the video out directly to the
video input on the TV.
• Connect the video out directly to the
video input on the TV.
• To enjoy the software encoded with
Dolby Digital or DTS Digital
Surround, connect the DVD player
using one of the DIGITAL IN
terminals (see above).
You can also connect the CD player
using one of the DIGITAL IN terminals
(see above).
Getting Started
• When shipped from the factory, the DIGITAL IN
terminals have been set for use with the
following components.
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For digital TV tuner
If you connect other components, change the
digital input (DIGITAL IN) terminal setting
correctly. See “Setting the Digital Input
Terminals” on page 10.
• Select the digital input mode correctly.
See “Selecting the Analog or Digital Input
Mode” on page 11.
EN01-07.RX-E100SL[J]_f 01.3.7, 2:47 PM7