Filter
Top Products
20
Tuner Operations
You can also use the remote control for some tuner operations.
• When using the remote control, see also “Mastering Remote Operations” on page 32.
Tuning in Stations Manually
1
Press FM or AM to select the band.
The last received station of the selected band is tuned in, and the
CONTROL buttons now work for tuner operations.
2
Press CONTROL ∞ (or 5) repeatedly until
“< TUNING >” appears on the display.
3
Press repeatedly or hold CONTROL 3 or 2
until you find the frequency you want.
• Pressing (or holding) CONTROL 3 increases the frequencies.
• Pressing (or holding) CONTROL 2 decreases the frequencies.
Notes:
• When you hold and release CONTROL
3
or CONTROL
2
, the
frequency keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the ST (Stereo) indicator
also lights up.
Remote
NOT
Remote
NOT
Using Preset Tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Tune in the station you want to preset (see
“Tuning in Stations Manually”).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the
FM Reception Mode” on page 21.
2
Press MEMORY.
The channel number position starts flashing on the display for
about 10 seconds.
3
Press CONTROL 3 (or 2) to select a channel
number while the channel number position is
flashing.
DVD TV VCR CD FM
AM
RX-E100
HOME THEATER RECEIVER
TV DILECT
DVD
MEMORY
CONTROL
ADJUST
SETTING
STANDBY
DIGITAL
DIGITAL
SURROUND
INPUT
ANALOG/DIGITAL
INPUT ATT
MASTER VOLUME
SURROUND
ON/OFF
DSP
MODE
ANALOG
PRO LOGIC
SUBWFRLFE
SLEEP STTUNED MUTING
MH
Z
KH
Z
VOL
AUTO
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
POWER
MEMORY
CONTROL
5/∞/3/2
Display
Source selecting buttons
(FM, AM)
MEMORY
Ex.: When selecting the FM band
FM
AM
CONTROL
STTUNED MUTING
MH
Z
VOL
AUTO
ANALOG
STTUNED MUTING
MH
Z
VOL
AUTOLR
CONTROL
STTUNED MUTING
MH
Z
VOL
AUTO
CONTROL
STTUNED MUTING
VOL
AUTO
Then
STTUNED MUTING
MH
Z
VOL
AUTO
STTUNED MUTING
MH
Z
VOL
AUTO
STTUNED MUTING
MH
Z
VOL
AUTO
EN20-21.RX-E100SL[J]_f 01.3.7, 2:51 PM20