Filter
Top Products
29
ANALOG
PRO LOGIC
SUBWFRLFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
DVD TV VCR CD FM
AM
RX-E100
HOME THEATER RECEIVER
TV DILECT
DVD
MEMORY
CONTROL
ADJUST
SETTING
STANDBY
DIGITAL
DIGITAL
SURROUND
INPUT
ANALOG/DIGITAL
INPUT ATT
MASTER VOLUME
SURROUND
ON/OFF
DSP
MODE
ANALOG
PRO LOGIC
SUBWFRLFE
SLEEP STTUNED MUTING
MH
Z
KH
Z
VOL
AUTO
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
POWER
ADJUST
SURROUND
ON/OFF
Creating Realistic Sound Fields
Display
CONTROL
5/∞/3/2
2
Press SURROUND ON/OFF to activate an
appropriate Surround mode — Pro Logic, Dolby
Digital, or DTS Digital Surround.
• Each time you press the button, Surround mode turns on and
off alternately.
Note:
When playing back an analog source, “SURROUND ON” will not
appear, and “PRO LOGIC” appears as soon as you press
SURROUND. (The PRO LOGIC indicator also lights up on the
display.)
3
Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
4
Press CONTROL ∞ (or 5) repeatedly until one
of the following indications (with the current
setting)
* appears.
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 12).
• You cannot adjust the center speaker output level when you have
set “CTR SP” to “NO.”
• You cannot adjust the rear speaker output levels when you have set
“REAR SP” to “NO.”
Using Surround Modes (Front Panel)
Surround mode cannot be used with another DSP mode. Once
Surround mode is activated, the other DSP mode in use will be
canceled.
When using the buttons on the front panel, no test tone is available.
Make adjustments while listening to the sound of the source played
back.
• You have to make this adjustment for each source.
1
Select and play software encoded with Dolby
Surround, Dolby Digital, or DTS Digital
Surround.
If “AUTO SR (Auto Surround)” is set to “ON”
Playing a digital source automatically activates an appropriate
Surround mode. (See page 16.)
IMPORTANT
To view the pictures on the TV, connect the video
components directly to the TV, and select an appropriate
input on the TV.
When using the remote control for DSP operations,
see pages 25 to 28.
SURROUND
ON/OFF
Ex.: When Dolby Digital is activated
VOL
A
UTO
VOL
A
UTO
Then
CONTROL
ADJUST
TO BE CONTINUED ON THE NEXT PAGE
EN22-31.RX-E100SL[J]_f 01.3.7, 2:53 PM29