Filter
Top Products
26
Creating Realistic Sound Fields
4
Press TEST to check the speaker output balance.
“TEST L” starts flashing on the display, and a test tone comes
out of the speakers in the following order:
Notes:
• You can adjust the speaker output levels without outputting the
test tone.
• No test tone comes out of the center speaker when “CTR SP”
is set to “NO.”
• No test tone comes out of the rear speakers when “REAR SP”
is set to “NO.”
5
Adjust the following speaker output levels
(from –10 to +10).
• Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
To adjust the center speaker level, press CENTER +/–.
To adjust the left rear speaker level, press REAR•L +/–.
To adjust the right rear speaker level, press REAR•R +/–.
6
Press TEST again to stop the test tone.
1
TEST
O
LOGIC
VOL
T
L AUTO
U
T ATT
P
(Left front speaker)
(Left rear speaker)
(Right rear speaker)
(Center speaker)
(Right front speaker)
ANALOG
PRO LOGIC
SUBWFRLFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
ANALOG
PRO LOGIC
SUBWFRLFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
ANALOG
PRO LOGIC
SUBWFRLFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
6
5
– CENTER +
5
98
– REAR•L +
5
MENU
– REAR•R +
ENTER
+10
0
G
IC
VOL
U
TO
T
T
1
TEST
To cancel Surround Mode
Press SURROUND again so that “STEREO” appears on the display.
• If Surround mode is canceled while playing back multichannel
digital software, all channel signals are mixed and output through
the front speakers (and subwoofer if you have connected a
subwoofer and set the subwoofer setting correctly – “YES.”)
1
1
REMOTE CONTROL
SURROUND
DSP MODE
SOUND
5
– SUBWOOFER +TESTSLEEP
6
5
EFFECT
– CENTER +
5
98
– REAR•L +
BASS
BOOST
5
– REAR•R +
MENU
5
CD
AM
MUTING
TV/VIDEO
TV
VCR
FM
TV VOL
TV/VCR
CH
DVD
–
–
+
+
VOLUME
POWER
8
7
RM-SRXE100J
HOME THEATER RECEIVER
32
INPUT A/D
ENTER
+10
010
+
+
–
7
£
TV
VCR
AUDIO
DVD
1
4
CENTER
+/–
REAR•L
+/–
REAR•R
+/–
Using Theater Surround (Remote Control)
Theater Surround cannot be used with another DSP mode. Once
Theater Surround is activated, the other DSP mode in use will be
canceled.
• You have to make this adjustment for each source.
• You cannot use Theater Surround if no rear speakers are
connected.
1
Select and play software encoded with Dolby
Surround.
EFFECT
SOUND
DSP MODE
TEST
EN22-31.RX-E100SL[J]_f 01.3.7, 2:53 PM26