Filter
Top Products
52
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC video components (TV and VCR) through the center unit.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1 ———————————————————————————————————————
TV
VCR
CAUTION:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the TV SOUND/DBS jacks on the center unit.
Notes:
• Refer also to the manual supplied with your video components.
CONNECTIONS 2 ———————————————————————————————————————
CASE 1 : If the components are equipped with the S-video terminals.
To Video input 1
VCR
DO NOT use these video terminals.
To Video input 2
VCR
CASE 2 : If the components are not equipped with the S-video terminals.
TV
TV
DO NOT use these video terminals.
CASE 3 : If only the VCR is equipped with the S-video terminal.
To Video input 1
VCR
DO NOT use these video terminals.
To Video input 2
VCR
CASE 4 : If only the VCR is not equipped with the S-video terminal.
TV
TV
DO NOT use these video terminals.
To Video input 2
To Video input 1
TH-A10[J]7/1 00.2.24, 14:5952