Filter
Top Products
101
Advanced Setup
This section explains items on the Speaker Config menu.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 55).
Speaker Settings
See “Speaker Settings” on page 47.
Speaker Configuration
With the Speaker Configuration settings, you can specify
which speakers are connected and a crossover frequency
for each speaker.
The following crossover frequencies can be specified:
Full Band, 40 Hz, 45 Hz, 50 Hz, 55 Hz, 60 Hz, 70 Hz,
80 Hz (THX), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 130 Hz,
150 Hz, or 200 Hz.
Specify Full Band for speakers that can output low-fre-
quency bass sounds adequately, for example, speakers
with a good sized woofer. For smaller speakers, specify
a crossover frequency. Sounds below the crossover fre-
quency will then be output by the subwoofer instead of
the speaker. Refer to your speakers’ manuals to deter-
mine the optimum crossover frequencies.
If you’re using THX-certified speakers, specify
80 Hz (THX) for all speakers.
Speaker Setup
/
Input Selector
Macro
123
VCRDVD
CDR/MD/Dock
CD
Zone
2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver
TV
Net/USB
Cable
VOL
CH
Disc
Album
+
-
Enter
T
o
p
M
e
n
u
M
e
n
u
Display Muting
E
x
i
t
G
u
i
d
e
Prev
CH
R
e
t
u
r
n
S
e
t
u
p
Listening Mode
Playlist
RandomRec
SAT
Zone
3
Setup
Receiver
Enter
These settings are set automatically by the Automatic
Speaker Setup function (see page 55).
1
Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press [Enter].
The Speaker Setup menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Config,” and then press [Enter].
The Speaker Config screen appears.
4
Use the Up and Down [ ]/[ ]
buttons to select “Subwoofer,”
and then use the Left and Right
[ ]/[ ] buttons to select:
Yes:
Select if a subwoofer is con-
nected.
No:
Select if no subwoofer is con-
nected.
Receiver
S
e
t
u
p
Enter
Enter
2.Speaker Setup
1.Speaker Settings
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.Equalizer Settings
6.THX Audio Setup
Enter
Enter
2-2.Speaker Config
Subwoofer
Yes
Front Full Band
Center 100Hz
Surround 100Hz
Surr Back 100Hz
Surr Back Ch 2ch
LPF of LFE 120Hz
Double Bass On
Enter
Enter