Filter
Top Products
33
Speaker Setup
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER| Quit:|OSD|
1-4.Bass Peak Level
a.Bass Peak Level
Limiter :Off
Quit:|OSD|
a. Bass Peak Level Limiter
On: Select to set the bass peak level. When “On” is selected, the
Peak Level setting appears below.
Off: Select to turn off the bass peak level limiting function.
1-4. Bass Peak Level (Bass Peak Level
Manager*) sub-menu
Setting the bass peak level is important to keep your subwoofer
from being damaged by preventing it from outputting over a set
volume. If your subwoofer has a built-in limiter, set this setting to
“Off.”
Note:
If your system does not include a subwoofer, this setting will set
the bass peak level for your front speakers.
b. Bass Peak Level
The current bass peak level is displayed. Press the ENTER button
(or the SSC dial) to output a test sound. Then press the
cursor
button (or turn the SSC dial) to slowly raise the volume to the point
where the sound becomes distorted and then back it off until it
returns to normal. This is the proper setting for the bass peak level.
After setting the Peak Level at the Bass Peak Level sub-menu,
press the EXIT button. The values are set and the previous screen
appears.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER| Quit:|OSD|
1-4.Bass Peak Level
a.Bass Peak Level
Limiter :On
b.Bass Peak Level
:-12dB|ENTER|
|ENTER| Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER| Quit:|OSD|
1-4.Bass Peak Level
b.Peak Level :-12dB
1.Turn Volume up.
2.Press EXIT just
before sound is
distorted.
Quit:|OSD|
Note:
• The volume can be adjusted to either – or between –61 to
+18 decibels in 1-decibel increments.
• Do not allow the distorted sound to be output from the
subwoofer for a long time for it may damage the subwoofer.
* Bass Peak Level Manager is a registered trademark of Lucasfilm Ltd.