Filter
Top Products
6
Insignia NS-H3005 Home Theater System
www.insignia-products.com
Make sure that you refer to the instructions
supplied with the DVDs. Some DVDs made for
business purposes may not play on the player.
Regional codes
This DVD player is designed and
manufactured for playback of Region 1
encoded DVD software. The region
code on the labels of some DVDs
indicates which type of player can play those
discs. This player can only play DVDs labeled 1
or ALL. If you try to play any other discs, the
message Check Regional Code appears on the
television screen. Some DVDs that have no
region code label may still be subject to area
restrictions and therefore not playable.
Disc glossary
Title (DVD video discs only)
A title is the main film content or accompanying
feature content or additional feature content, or
music album. Each title is assigned a title
reference number to make it easy for you to
locate it.
Chapter (DVD video discs only)
Chapters are sections of a video or a musical
piece that are smaller than titles. A title is
composed of one or more chapters. Each
chapter is assigned a chapter number to make it
easy for you to locate the chapter you want.
Some discs may not have chapters.
Track (Audio CD only)
Tracks are sections of a musical piece on an
audio CD. Each track is assigned a track number
to make it easy for you to locate the track you
want.
Audio glossary
DTS
Lets you enjoy 5.1(or six) discrete channels of
high quality digital audio from DTS program
sources such as DVDs and CDs bearing the
trademark. DTS Digital Surround delivers up to
six channels of transparent audio and results in
exceptional clarity throughout a true 360 degree
sound field. The term DTS is a trademark of
DTS Technology, LLC. This player is
manufactured under license from DTS
Technology, LLC.
Dolby Digital
The Dolby Digital surround format lets you enjoy
up to 5.1 channels of digital surround sound
from a Dolby Digital program source. If you play
DVDs with the mark, you can enjoy even
better sound quality, greater spatial accuracy,
and improved dynamic range.
Pro Logic
Use this mode when playing a movie or Dolby
Digital 2 channel which carries the mark.
This mode provides the effect of being in a
movie theatre or live concert house—an effect
with an intensity which can only be obtained
through Dolby Pro Logic Surround. The effect of
the front, back, left, and right movement of the
sound image, as well as the sense of fixed
position in the sound image, is much clearer and
more dynamic than before.
Pro Logic (II)
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources. This
is done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
Music mode
The Music mode is for use with any stereo music
recordings.
Matrix mode
The Matrix mode is the same as the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono
signals by making them seem
larger
.
3D SURROUND
This player can produce a 3D surround effect,
using 3D Surround Sound technology, which
simulates multi-channel audio playback from two
conventional stereo speakers instead of the five
or more speakers normally required to listen to
multi-channel audio from a home theatre. This
feature works with DVDs encoded with Dolby
Pro Logic and Dolby Digital audio tracks.
BYPASS
Software with multichannel surround audio
signals is played according to the way it was
recorded.
Sound mode
You can enjoy surround sound by selecting one
of the pre-programmed sound fields according to
the program you want to listen to.
DVD playback
You can change the Digital Audio Output mode
by pressing the AUDIO button on the remote
control during playback. Although the DVD
contents differ from disc to disc, the following
explains the basic operation when this feature is
used.
• After you select two channel by pressing the
AUDIO button, press the SOUND MODE
button repeatedly. The sound mode
selections are as follows:
•Bypass
• PRO Logic
•Movie
•Music
•Matrix
• 3D Surround
• After you select 5.1 channel by pressing the
AUDIO button, press the SOUND MODE
button. BYPASS is the only option.
1
( )