Filter
Top Products
3
Insignia NS-H3005 Home Theater System
www.insignia-products.com
Display window
2 Remote sensor and display
window
Point the remote control here.
For more information about
the display window, see
“Display window” on page 3.
3 Open/Close Opens or closes the disc tray.
4 Tape compartment (VCR) Insert a video tape here.
5 REC/ITR Press to record or to activate
Instant Timer Recording.
6 Reverse SKIP/SCAN / DVD: Press to go to the
beginning of the current
chapter or track or to the
previous chapter or track.
Press and hold for two
seconds to fast reverse
search.
VCR: Press to rewind the tape
during Stop mode or to fast
reverse picture search.
7
Play
Press to play a recorded tape
or disc.
8 Forward SKIP/SCAN / DVD: Press to go to the
beginning of the next chapter
or track.
Press and hold for two
seconds to fast forward
search.
VCR: Press to advance the
tape during Stop mode or to
fast forward picture search.
9 Stop Press to stop playback of a
tape or disc.
10
Pause/Step
/
Press to temporarily pause
playback of a tape or disc.
Press repeatedly for
frame-by-frame playback.
11 Eject Press to eject the tape from
the VCR.
12 Volume control Turn the knob clockwise to
increase the volume. Turn the
knob counterclockwise to
decrease the volume.
13 DVD/VCR (output select) Press to select DVD or VCR as
your output source to view on
the television.
14 CH/PRESET +/- Press to scan up or down
through the radio or television
stations in memory or to
control tracking during video
tape playback.
15 FM/AM Press to switch between FM
and AM bands.
16 Input select Select the VCR’s input source
(Tuner, Line1, or Line2)
17 Line 2 Video In/Audio In
(Left/Right)
Connect the audio and video
output from an external
source such as an audio
system, television, monitor, or
VCR.
18 Standby/On Press to switch the home
theater system on or off.
Component Description
Description
1 Displays the current audio stream.
2 Lights up when a WMA disc is playing.
3 Lights up when the radio is playing.
4 Displays the current surround mode.
5 Lights up when an SAP bilingual broadcast is being
received.
6 Lights up when the programmed playback is active.
7 Lights up when a disc is loaded in the DVD. Flashes
when the disc tray is opened.
8 Lights up when the VCR is in VCR Timer Recording
mode or a VCR timer recording is programmed.
9 Lights up when a DVD to VCR copy is in progress.
10 Lights up when the VCR is recording a tape.
11 Lights up when the recorder is playing back a tape that
was recorded in Hi-Fi.
12 Lights up when the volume is muted.
13 Lights up when a tape is loaded into the VCR.
14 Displays the total playing time, elapsed playing time,
frequency, remaining time, current deck status,
surround mode, and volume.
15 Displays the current chapter number, track number, or
channel number.
16 Lights up when the home theater system is in TV mode.
17 Lights up to indicate an MP3 or WMA disc is inserted.
18 Displays the repeat playback mode.
19 Lights up to indicate a DVD is loaded into the home
theater system.
20 Lights up when a stereo broadcast is being received.
21 Lights up to indicate a JPEG file disc is loaded into the
home theater system.
22 Lights up to indicate the home theater system is in
progressive scan mode.
MUTE REC COPY
CHPTRK
TITLE
RPT ALL
A B
MP3 TV
DVD SAP
PROG
PROLOGIC
DIGITAL
PCM WMA
ST
PHOTO
P/SCAN
Hi-Fi
d
t
s
II
RADIO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22