Filter
Top Products
4
Insignia NS-H3005 Home Theater System
www.insignia-products.com
Back panel Remote control
Component Description
1 AC power cord Plug into an electrical outlet.
2 VCR in line 1 (Video
in/Audio in
(left/right))
Connect the audio/video output of an
external source such as an audio
system, television or monitor, or VCR
to these jacks.
3 DVD/VCR out video
out/audio out
(left/right))
Connect to a television that has audio
and video inputs.
4 Component/
progressive scan
video out (Y, Pb, Pr)
(DVD out)
Connect to a television that has
component (Y, Pb, Pr) inputs.
5 Television antenna in Connect the VHF/UHF antenna or
CATV cable to this terminal.
6 FM antenna Connect the FM antenna to this jack.
7 AM antenna Connect the AM antenna to this jack.
8 Speaker connections Connect the six speakers to these
jacks.
9 Coaxial out Connect to a television that has
coaxial inputs.
Caution
Do not touch the inner pins of the jacks on the back panel.
Electrostatic discharge may cause permanent damage to the
home theater system.
1
2
3
4
5
6
7
8
9
Component Description
1 Power Press to turn the home theater system
on or off.
2 CD/DVD/VCR
select
Press to select the output source
(CD/DVD or VCR) to view on the
television.
30-9 number
keypad
Press to enter numbers such as in a
menu.
4 Program Press to open or close the Program
menu.
5 Clear Press to remove a track number on the
Program menu or a mark on the Marker
Search menu.
Press to clear preset stations from the
tuner memory.
6 Display/CLK/CNT Press to view the on-screen display.
Press to switch between the clock, tape
counter, and tape remaining modes on
the display.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25