Filter
Top Products
7 Maintenance Guide
7-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
To configure the LAN parameters, do as follows:
Step 1
Choose
A
Step 2
C rameters -1. Generally keep the default settings is OK.
T ameters f
7.2 Configuring the LAN Interface
dvanced Setup
>
LAN
in the navigation tree.
hange the pa refer to Table 7
able 7-1 Par or the Local Area Network (LAN) Setup page
Parameter Description
IP Address
using this IP address. If the DHCP function of the
computer and the IP address of the LAN
gment. In
address
It specifies the IP address of the LAN interface of the terminal.
You can access the Web-based configuration
utility of the
terminal by
terminal is enabled, the terminal assigns an IP address that is in
the same n
etwork segment as that of this interface to a
computer.
If the IP address of the LAN interface is changed, ensure that
the IP address of the
interface of the terminal are in the same network se
this case, you need to enter the new IP address in the
bar of an explorer.
Subnet Mask It specifies the subnet mask of the LAN interface.
LAN Domain
ed
lity, you need to enter
Vodafone.DSLRouter
It specifies the domain to enter the web Web-based
configuration utility
. The default LAN domain is
Vodafone.DSLRouter
. In this c
ase, to access the Web-bas
configuration uti
in the address bar of Internet Explorer.
LAN
MTU:[296-1500]
length of the tran
sported IP package of the The maximum
LAN interface.
Enable IGMP
Snooping
n of It specifies whether to
enable the IGMP Snooping functio
the terminal
.
Enable/Disab
DHCP Se
le
rver
ddresses
that can be assigned to the computers on the LAN. This
.
An IP address pool contains multiple consecutive IP a
parameter specifies the start IP address of the IP address pool
Start/End IP
Address
the IP address pool. It specifies the end IP address of
Leased Time
(hour)
It specifies the period during which a computer on the LAN
can use an assigned IP address.
Step 3
Click
Save
to save th
e LAN configuration. Click
Save/Reboot
to save the LAN
configuration and reboot the terminal to make the new configuration effective.
----End