Filter
Top Products
4 Configuring the WAN Interface
4-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-5 PPP Username and Password page for PPPoE
Table 4-4 Parameters for the PPP Username and Password page
Parameter Description
PPP Username
The user name of the PPP, which is provided by the
Internet Service Provider.
PPP Password
The user name of the PPP, which is provided by the
Internet Service Provider.
PPPoE Service Name
The name of the PPPoE, which is provided by the
Internet Service Provider.
PPP's MTU:[296-1492]
The maximum length of the transported IP package
with the se
lected PPPoA protocol.
PPP's LCP Echo-req
Interval:[10-60]
It specifies the time interval of the two echo-requests.
Authentication Method The authentication method of the PPP protocol.
Connect method It is assigned by the Internet Service Provider.
Step 4
Click
Next
to show the
Enable WAN Service
page, just keep the default settings. Make
sure choose
Data
in the
Service Name
drop-down list box.
Step 5
Click
Nex
t
to show the
WAN Setup-Summary
page, click
Save
to save the settings.
Click Back to make any modifications. Reboot the terminal so that the settings take effect.
----End