Filter
Top Products
4 Configuring the WAN Interface
4-10 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4.2 Selecting HSPA uplink mode
To configure the WAN parameters by HSPA uplink mode, do as follows:
Step 1
Logging in to
the Web-based configuration utility. For details, see section
3.3 "Logging
In to the Web-Based Configur
ation Utility."
Step 2
Choose
Advanced Setup
>
WA
N
in th
e navigation tree.
Step 3
Select
USB Uplink
. If you choose the USB uplink, insert the USB stick firstly. More
details, see section 3.2 "Inserting the USB Stick."
Step 4
Click
Ne
xt
to show the
Hsdpa Profile Settings
page,
just keep the default settings on
the page.
Step 5
Click
Ne
xt
three times again.
Step 6
Click
Save
to sa
ve the settings, click
Save/Reboot
to save the settings and reboot the
terminal to make the new configuration effective.
----End
If the SIM card of your USB stick set the PIN
co
de, you have to verify the pin code:
Step 1
Choose
Advanced Setup
>
Pi
n Code
in the navigation tree.
Step 2
Enter the
pin code of the USB stick in the
Pin Code
text box.
Step 3
Click
Check
. After v
erifying the pin code, you can access the Internet.
----End