Filter
Top Products
4 Configuring the WAN Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-7
4.1.3
Table 4-5
Configuring the MER Mode
To configure the MER mode for the WAN interface, do as follows:
Step 1
Repeat from the
step1 to the step 7 of
4.1.1 "Configuring the PPPoA Mode."
Step 2
On the
Conne
c
tion Type
page, select
MAC Encapsulation Routing (MER)
. Keep
other settings by the Internet Service Provider.
Step 3
Click
Next
to show the
WAN IP Settings
page, you can keep the default settings or set
the parameters refer to Table 4-5.
Parameters for the WAN IP Settings page
Parameter Description
DHCP Class Identifier It specifies the client.
WAN IP Address It specifies the WAN IP address of the PVC.
When the method for obtaining an IP address is set to
using a static IP address, th
e terminal provides this
parameter.
WAN Subnet Mask It specifies the WAN subnet mask of the PVC.
When the method for obtaining an IP address is set to
using a static IP address, th
e terminal provides this
parameter.
Primary DNS server
It specifies the IP address of the primary DNS server used
by t
he PVC.
When the method for obtaining an IP address is set to
using a static IP address, th
e terminal provides this
parameter.
Secondary DNS server
It specifies the IP address of the secondary
DNS server
used by the PVC.
When the method for obtaining an IP address is set to
using a static IP address, th
e terminal provides this
parameter.
IpoE's
MTU:[296-1500]
The maximum length of the transported IP package with
the selected IPoE protocol.
Step 4
Click
Nex
t
to show the
Network Address Translation Settings
page, just keep the
default settings. Make sure choose
Data
in the
Service Name
drop-down list box.
Step 5
Click
Nex
t
to show the
WAN Setup-Summary
page, click
Save
to save the settings.
Click Back to make any modifications. Reboot the terminal so that the settings take effect.
----End