Harman-Kardon AVR 330 Stereo Receiver User Manual


 
REAR-PANEL CONNECTIONS 9
REAR-PANEL CONNECTIONSREAR-PANEL CONNECTIONS
Video 1 Audio/Video Inputs: Connect the com-
posite video and L/R analog audio PLAY/OUT jacks of
a VCR or other video source to these jacks.
Video 1 Audio/Video Outputs: Connect the
composite video and L/R analog audio REC/IN jacks
of a VCR or other video recording device such as a
DVD recorder or PVR to these jacks.
Video 2 Audio/Video Inputs: Connect the com-
posite video and L/R analog audio PLAY/OUT jacks of
a VCR or other video source to these jacks.
Video 2 Audio/Video Outputs: Connect the
composite video and L/R analog audio REC/IN jacks
of a VCR or other video recording device such as a
DVD recorder or PVR to these jacks.
Video 3 Audio/Video Inputs: Connect the com-
posite video and L/R analog audio PLAY/OUT jacks of
a VCR or other video source to these jacks.
Tape Inputs:
Connect these jacks to the PLAY/OUT
jacks of an audio recorder.
AM Antenna Terminals: Connect the AM loop
antenna supplied with the receiver to these terminals. If
an external AM antenna is used, make connections to
the
AM and GND terminals in accordance with the
instructions supplied with the antenna.
FM Antenna Jack: Connect the supplied indoor (or
an optional external) FM antenna to this terminal.
Note on video connections: When connecting a source
device, such as a VCR, DVD player, cable or satellite set-
top box or video game, to the AVR, use either a compos-
ite or S-Video connection for each input, but not both.
41
40
39
38
37
36
35
34