Filter
Top Products
Once the Multiroom system is turned on, it will remain
on even if the AVR 330 is placed in the Standby
mode in the main room by pressing the
Power Off
Button
a on the remote or the Standby/On
Button
3 on the front panel. When the Multiroom
system is on, but the AVR is otherwise placed in
Standby in the main room, a
MULTI-ROOM
ON
indication will remain lit at half brightness in the
Lower Display Line ¯ to remind you that one part
of the system is still in operation.
Even when the AVR 330 is turned off in the main
room, the multiroom system may be turned on at any
time by pressing any of the
Selector Buttons
∫ç∂
in the remote room.
When the Multiroom system is activated, you may turn
it off from the remote room location by pressing the
Power Off Button
å
a on the remote. The
Multiroom system may only be turned off using the
Multiroom Button in the main room if the
AVR 330 is turned on.
37
34 MULTIROOM OPERATION
MULTIROOM OPERATION