Filter
Top Products
29
Configuration Menu Functions
Configuration Menu
ì¸óÕâšëúìx
ÉXÉäÅ[ÉvÉÇÅ[Éh
Yes, No
Yes, No
p.33
Yes, No
p.36
Settings
Info
• The message text will be displayed in yellow when it is time to replace the lamp.
• Time from 0H to 10H will be displayed as 0H. From 10H onwards, the display will be in units of 1H.
The "Info" menu is only used to display the projector status.
Only displayed for composite video/S-Video input
Only displayed for component video/Computer image input
This is information about errors that have occurred on the projector.
This value is sometimes referred to when inquiries are made.
Memory
Direct Power On p.33
On, Off
Sleep Mode p.33
Child Lock
p.33
Control Panel Lock
p.34
Trigger Out
p.34
High Altitude Mode
p.34
Projection
p.34
Display
p.34
Load Memory
p.36
Save Memory p.36
Erase Memory
p.36
Reset All
p.36
Reset Memory
p.36
Reset Lamp Hours
p.36
Input Signal
p.35
Language
p.35
Reset
p.35
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
Sync Info
Video Signal
Deep Color
Status
Off, 5min., 10min., 30min.
On, Off
On, Off
On, Off
On, Off
Front, Front/Ceiling, Rear, Rear/Ceiling
Menu Position
Top-left, Top-center, Top-right, Center-left, Center,
Center-right, Bottom-left, Bottom-center, Bottom-right
Menu Color
Messages
Display Background
Startup Screen
Color 1, Color 2
On, Off
Black, Blue, Logo
On, Off
Video Signal
Component
Auto, NTSC , NTSC4.43, PAL ,
M-PAL, N-PAL, PAL60, SECAM
Auto, YCbCr , YPbPr
Yes, No
Memory1 to Memory10
Display the color depth of HDMI transmission.
Only displayed for Computer image input
Reset
On, Off
Illumination p.34
Memory1 to Memory10
Memory1 to Memory10
Standby Confirmation
Serial Number
On, Off