Filter
Top Products
25
Viewing Images at a Preset Image Quality (Memory Function)
Image Quality Adjustments
Erase Memory
Renaming Memory
TIP
Adjust each of the settings to the values
to be saved.
Press , and select "Save
Memory".
The Save Memory screen is displayed.
Select the memory name to register the
adjustments to from Memory1 to 10, and
press or .
When preceding the memory name is
green, this indicates that adjustments are
already saved to memory.
Select an already saved memory name, and
press or .
A confirmation message will be displayed.
If you select "Yes", the previous memory
content is erased, and the current adjustment
values are saved.
The color mode selected when
the memory was registered is
displayed on the right side.
Some settings retrieved from
memory may not be applied to
the images depending on the
input signal.
Save Memory
Load saved memories.
Load Memory
This feature can be used to erase and clean up
unwanted memories.
Press , and select "Erase
Memory".
The Erase Memory screen will be displayed.
Select the memory name to erase.
A confirmation message will be displayed. If
you select "Yes", the memory will be erased.
To erase all saved memories, select "Reset" -
"Reset Memory" in the Configuration menu.
p.36
Erase Memory
Press , and select "Load
Memory".
The Load Memory screen will be displayed.
Select the target memory name.