Filter
Top Products
28
Configuration Menu Functions
List of configuration menus
When no image signals are being input, the
"Image"
menu and the
"Signal"
menu cannot be adjusted.
Also, the items displayed in the
"Image"
menu, the
"Signal"
menu and the
"Info"
menu will vary
depending on the type of image signals that are being projected.
*
*
*
*
*
*
*
Reset
p.31
Color Mode p.30
Image
Dynamic, Living Room, Natural, Theatre,Cinema,
2.0, 2.1, 2.2, 2.3, 2.4
Not displayed when image signals are being input from a computer. * This is displayed in the line menu.
Brightness p.30
Contrast
p.30
Color Saturation
p.30
Tint
p.30
Sharpness
p.30
Abs. Color Temp.
p.30
Skin Tone
p.30
Advanced
p.30
Power Consumption
p.31
Auto Iris
p.31
Reset
p.31
Normal, ECO
Off, Normal, High Speed
Yes, No
Standard
Advanced
Gamma
RGB
RGBCMY
Thin Line Enhancement, Thick Line Enhancement,
Horiz. Line Enhancement, Vert. Line Enhancement
Customized
Adjust it from the image
Adjust it from the graph
Reset
Offset R, G, B
Gain R, G, B
R (Hue/Saturation/Brightness),
G (Hue/Saturation/Brightness),
B (Hue/Saturation/Brightness),
C (Hue/Saturation/Brightness),
M (Hue/Saturation/Brightness),
Y (Hue/Saturation/Brightness)
Signal
Aspect p.31
Auto, Normal, Full, Zoom, Wide
Zoom Size p.31
Zoom Caption Pos.
p.31
Tracking
p.31
Sync. p.31
Position p.32
Auto Setup
p.32
On, Off
Progressive p.32 Off, Video, Film/Auto
Motion Detection p.32
Noise Reduction
Off, 1, 2, 3
Overscan
Auto, Off, 2%, 4%, 6%, 8%
Setup Level
0%, 7.5%
EPSON Super White
On, Off
HDMI Video Range
Auto, Normal, Expanded
2-2 Pull-down p.32
On, Off
Not displayed when image signals are
being input from a computer.
Only displayed for Computer image input
(does not appear when signals from the [HDMI1]/[HDMI2] input port are being input)
Reset p.33
Yes, No
("x.v.Color" is displayed when a signal is being input through the HDMI1/HDMI2 input terminals.)
Advanced p.32