Filter
Top Products
Model IFT9701 Transmitter Instruction Manual 47
Configuration with ProLink II Software continued
Configuration with Communicator TroubleshootingConfiguration with ProLink IIFlowmeter Startup
7.2.2 Process variable measurement
To configure process variable measurement:
1. From the ProLink menu, click on Configuration.
2. In the Configuration window, click on the Flow tab. The Flow panel appers (as depicted in
Figure 7-2).
Figure 7-2 Configuration window – Flow panel
3. To specify the flow measurement unit, open the Flow Units list box and select a flow unit. If
you select a unit of mass flow, the transmitter will measure mass flow. If you select a unit of
volume flow, the transmitter will measure volume flow. A list of available flow measurement
units is provided in Table 7-1.