Filter
Top Products
Model IFT9701 Transmitter Instruction Manual 37
Configuration with a HART Communicator continued
Configuration with Communicator TroubleshootingConfiguration with ProLink IIFlowmeter Startup
4. Measurement units affect other field device variables, and must be sent (downloaded) to the
flowmeter before other variables can be configured:
a. Whenever the display below appears, press F4 (OK).
b. To send the measurement unit to the flowmeter, press F2 (send).
To select measurement units for density and temperature, use the menu below and follow these steps:
1. At the online menu, choose 4 (detailed setup).
2. At the detailed setup menu, choose 2 (configure field device variables).
3. At the configure field device variables menu, choose 2 (density).
4. At the density menu, choose 1 (density unit).
5. Use the down arrow (Ø) or up arrow (×) to select the desired measurement unit, then press F4
(enter).
6. To send the density unit to the flowmeter, press F2 (send).
Table 6-1 Measurement units for mass and volume flow
Mass flow unit Software label Volume flow unit Software label
grams/second
grams/minute
grams/hour
kilograms/second
kilograms/minute
kilograms/hour
kilograms/day
metric tonnes (1000 kg)/minute
metric tonnes (1000 kg)/hour
metric tonnes (1000 kg)/day
pounds/second
pounds/minute
pounds/hour
pounds/day
short tons (2000 pounds)/minute
short tons (2000 pounds)/hour
short tons (2000 pounds)/day
g/s
g/min
g/h
kg/s
kg/min
kg/h
kg/d
Met Ton/min
Met Ton/h
Met Ton/d
lb/s
lb/min
lb/h
lb/d
S Ton/min
S Ton/h
S Ton/d
cubic feet/second
cubic feet/day
cubic feet/minute
cubic feet/hour
cubic meters/second
cubic meters/minute
cubic meters/hour
cubic meters/day
U.S. gallons/second
U.S. gallons/minute
U.S. gallons/hour
liters/second
liters/minute
liters/hour
Imperial gallons/second
Imperial gallons/minute
Imperial gallons/hour
Imperial gallons/day
barrels/second
barrels/minute
barrels/hour
barrels/day
Cuft/s
Cuft/d
Cuft/min
Cuft/h
Cum/s
Cum/min
Cum/h
Cum/d
gal/s
gal/min
gal/h
L/s
L/min
L/h
Impgal/s
Impgal/min
Impgal/h
Impgal/d
bbl/s
bbl/min
bbl/h
bbl/d
1 Process variables
2 Diag/service
3 Basic setup
4 DETAILED SETUP
5Review
1 Charize sensor
2 CONFIG FLD
DEV VAR
3 Config outputs
4Device
1Flow
2 DENSITY
3 Temperature
unit
1 DENSITY UNIT
2 Slug flow low limit
3 Slug flow high limit