Eclipse - Fujitsu Ten CD8445 Stereo Receiver User Manual


 
49
Basic operation
IV
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right:Increases the SVC setting level.
Turn to the left:Decreases the SVC setting level.
The volume difference can be set within a range of -10 to +20.
Enabling the loudness control
The loudness control may be turned on to emphasize low and high
frequencies at low volume levels.
Loudness compensates for the apparent weakness of low and high
frequencies at low volume by boosting the bass and treble levels.
Press and hold the [AUDIO CONTROL] button until the
[LOUD ON] display appears on the screen.
If the battery terminals have been disconnected because of a reason
such as vehicle maintenance, the SVC settings will return to their
default values. If this happens, you will need to make the settings
again.
To disable the loudness feature, repeat the above procedure to
display the [LOUD OFF] indication.
Loudness control is not available when CSII is ON. In order to
enable loudness control, turn OFF CSII. (For details on turning
CSII ON/OFF, see page 132.)
[AUDIO CONTROL] button
CD8445.book 49 ページ 2004年12月13日 月曜日 午前11時30分