Filter
Top Products
35
ESN security operating procedure
III
How to resume normal operation (ESN security lock out)
If power is disconnected while ESN security is active (a security
code was recorded), operation is disabled until power is restored
and the unit unlocked. Follow this procedure to resume normal
operation.
ESN security lock can be canceled by directly entering the security
code into the deck, or by using the Memory Stick that was being
used when the security code was recorded.
Canceling ESN security lock out using security code entry
When the power is turned on after disconnecting the
battery power, a [SEC] message will appear for two
seconds. Thereafter, message changes to [- - - -]
(Security code input display).
A security code is entered by pressing the buttons
[1] to [4].
Enter a four-digit security code using digits 0 to 9, A to F. The
number (shown on the display) changes in ascending order
between 0 and 9, A and F each time the button is pressed.
Each button number (1 to 4) corresponds to each digit (first to
fourth) of the security code.
Buttons [1] to [4]
[FUNC] button
CD8445.book 35 ページ ２００４年１２月１３日 月曜日 午前１１時３０分