Eclipse - Fujitsu Ten CD8445 Stereo Receiver User Manual


 
115
How to operate the Sound Adjustment Mode
IX
How to operate the Sound Adjustment Mode
About Sound Adjustment Mode
This deck is equipped with two different sound adjustment modes: normal
mode and advance mode.
In normal mode, the acoustic characteristics inside the vehicle can be
adjusted using comparatively simple settings. In addition, it corresponds to
basic sound systems which comprise front speakers, rear speakers, and
subwoofer.
In advance mode, the sound quality characteristics can be adjusted item by
item using more sophisticated settings than in normal mode. Refer to the
table below and to the operations for each mode for details of each mode.
The following adjustments can be made in normal mode and advance mode
respectively.
Normal mode Advance mode
DSP
(See page 125)
Position
(See page 126)
SRS Circle Surround II
(See page 132)
Parametric equalizer
(See page 133)
Time alignment
(Simplified)
(See page 139)
Crossover
(See page 128) (See page 145)
Multi-harmonizer
(See page 129) (See page 146)
Non-fader phase
(See page 127) (See page 147)
Non-fader output
(See page 130) (See page 148)
Sound data
(See page 121)
E-iSERV sound effect
customizations
(Parametric equalizer)
(See page 121)
E-iSERV sound effect
customizations
(Time alignment)
(Simplified)
(See page 121)
E-iSERV sound effect
customizations
(Crossover)
(See page 121)
CD8445.book 115 ページ 2004年12月13日 月曜日 午前11時30分