Eclipse - Fujitsu Ten CD8445 Stereo Receiver User Manual


 
48
Basic operation
SVC (Source Volume Control) Mode
You can set different volume levels for each audio mode. The
volume for the initial FM mode (default value: 40) is used as a
reference for storing the differences in volume that have been set
for each audio mode. When SVC is set, the volume level can
change as shown in the example settings in the table below.
Setting examples:
*: The volume levels can be set to a maximum of 80 and a
minimum of 0. If you try to go past the maximum or minimum
volume level, the level will not change. For the CD changer, SVC
adjusts the volume using the setting value for the CD player.
Audio mode FM AM CD
Memory Stick
Default value
(Volume level)
Reference
(40)
0
(40)
0
(40)
0
(40)
SVC setting
(Volume level)
Reference
(40)
SVC
setting
value
+15 (55)
SVC
setting
value
-10 (30)
SVC
setting
value
+5 (45)
When volume level in
FM mode is adjusted
from 40 to 45
45 55 60 30 35 45 50
When volume level in
CD mode is adjusted
from 35 to 60
45 70 60 80* 60 50 75
When volume level in
AM mode is adjusted
from 80 to 20
70 5 20 60 0* 75 10
When volume level in
Memory Stick mode is
adjusted from 10 to 35
5 30 20 45 0 20 35
[AUDIO CONTROL] button
CD8445.book 48 ページ 2004年12月13日 月曜日 午前11時30分