Filter
Top Products
122
How to operate the Sound Adjustment Mode
●Automatic parametric equalizer (Advance Mode Only)
This can be used to automatically correct distortion in frequency
characteristics (peaks and dips) based on the results of
measuring the frequency characteristics inside the vehicle.
Automatic parametric equalizer correction is carried out in the
following steps.
Frequency characteristic measurement
(Refer to "Measuring/display frequency characteristics" on page
136 for details.)
Saving sound quality data
(The folders and files that are required for E-iSERV sound
effect customizations are created automatically when the data
is written to the Memory Stick. Refer to "Measuring/display
frequency characteristics" on page 136 for details.)
ECLIPSE web site accessing
(Access the following URL: http://www.e-iserv.jp)
Automatic parametric equalizer adjustment
(Follow the instructions given on the web site.)
Correction data downloading
(Follow the instructions given on the web site.)
Correction data reading
(Refer to "Importing Sound Data" on page 149 for details.)
Time alignment and crossover adjustment
(Refer to "Time alignment adjustment" on pages 139 and
"Crossover adjustment" on pages 128 for details. In addition,
adjustment and settings can be carried out using the ECLIPSE
web site.)
CD8445.book 122 ページ ２００４年１２月１３日 月曜日 午前１１時３０分