37
ESN security operating procedure
III
If the contents recorded in the Memory Stick match
the information recorded by the deck, [OK] will
appear on the display for two seconds, and then the
deck will return to normal operation.
What happens if a Memory Stick or security code is incorrect?
After the 5th incorrect attempt, the display reads
[HELP] for five seconds.
After the [HELP] message was displayed for five seconds,
serial number will appear.
You will only get 5 unsuccessful unlock code entries. After the
5th attempt, you will be asked to insert the DISC (Key CD). At
this point, please contact your local Eclipse dealer or Eclipse
Customer Service for procedure on unlocking the unit.
● If the contents recorded in the Memory Stick do not match the
information recorded by the deck, [ERR_] (ERR and the error
number) will appear on the display for two seconds, and then [- - -
-] (security code entry display) will appear. If this happens, check
the Memory Stick and repeat the procedure from step 2.
● If [ERR5] (the 5th time an error has occurred) appears, [HELP] will
appear. When [HELP] appears, carry out the operations for an
ESN security lock out by following the procedure in " What
happens if a Memory Stick or security code is incorrect?" on page
37.
● ESN security lock cannot be canceled by this procedure if the
Memory Stick containing the security code was formatted.
● Note ●
For country-specific customer service information, refer to "How to
contact customer service" on page 209.
Your security code and Memory Stick can be easily forgotten.
Write the security code and Memory Stick title in a reminder note
(See page 211).
CD8445.book 37 ページ 2004年12月13日 月曜日 午前11時30分