Eclipse - Fujitsu Ten CD8445 Stereo Receiver User Manual


 
187
Others
XV
Others
Connecting portable audio players to the AUX jack
Use a commonly available accessory cord with the RCA connector to
connect a portable audio player to the AUX (auxiliary) jack of this system.
Turn on the portable audio player and start its play
function.
Switch to AUX mode by pressing the [DISC] button for
more than one second.
Activation of the AUX mode will light the "AUX" indicator and
channel audio player output to the system speakers.
While the AUX mode is activated, actions such as turning off the
audio player or pulling out the connection cord may cause noise
spikes that can damage the system speakers. Be sure to avoid
this possibility by turning off system power or switching from
AUX mode to another mode before shutting off or disconnecting
the portable audio player.
Audio output levels will differ for the various devices that can be
connected by this method. Carefully adjust volume until the
output level of the connected player is known.
Before using a portable audio player in a vehicle, read the
player's operation manual carefully and confirm problem-free
operation in the vehicle before proceeding.
[DISC] button
CD8445.book 187 ページ 2004年12月13日 月曜日 午前11時30分