Denon ADV-M51 Speaker System User Manual


 
87
ENGLISH
The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)
Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting.
(6) Setting the sleep timer (remote control unit only)
1
Select and play the desired function.
2
Press the SLEEP button.
•“120 is displayed and the SLEEP indicator flashes.
SLEEP
SOURCE
Remote control unit
120
SLEEP
The display switches as follows each time the SLEEP
button is pressed:
90120 60 50 3040 20 10
3
When the SLEEP indicator is flashing, press the SLEEP
button again until 50 is displayed.
•“50 is displayed and the SLEEP indicator flashes.
SLEEP
SOURCE
Remote control unit
50
SLEEP
After 4 seconds, the display returns to as it was before the
sleep timer was set, and the SLEEP indicator stops
flashing, remaining lit. (This completes the sleep timer
setting.)
4
The power is set to the standby mode 50 minutes later.
To turn the sleep timer off, press the SLEEP button repeatedly until
the SLEEP indicator turns off. The sleep timer can also be
turned off by press the power button on the main unit or the
remote control unit to turn the entire systems power to the
standby mode.
NOTES:
If the SLEEP button is pressed while the sleep timer is
operating, the setting returns to 120 minutes. Make the setting
over.
If the sleep timer and everyday timer settings overlap, the sleep
timer has priority.
8:00p.m. 9:00p.m. 10:00p.m.
8:00p.m. 9:00p.m. 10:00p.m.
ON
OFF
ON OFF
+
ON OFF
8:00p.m. 9:00p.m. 10:00p.m.
ON
OFF
ON OFF
+
Also, the everyday timer will not operate if its start time is set
within the time during which the sleep timer is operating.
SLEEP indicator off
Everyday timer
once timer setting
Sleep timer
setting
Timer operation
If the timers overlap like this, the timer operates as follows:
Everyday timer
once timer setting
Sleep timer
setting
Does not operate
The remaining time of the sleep timer can be checked with the
STATUS button.
Does not operate
ON / STANDBY
OFF
Main unit Remote control unit
SLEEP
SOURCE
Remote control unit
+
-
+
-
A-B REPEAT
SEARCH MODE
ONOFF
REPEAT RANDOM
CLEAR ZOOMSLIDE MODE
PROG/ DIRECT
MEMO BANDMODE
FUNCTIONSURROUNDINPUTMODETEST TONE
TUNER
CH
3
-
+
21
654
987
0
/
10
CALL
+
10
VCR
NTSC/PAL
SLEEP
ENTER
CD SRS
EDIT
/
MENUCHARAC.
REC
TIMETITLE
TUNING /
TV VOL
TV CH TV CH
TUNERDVD
MD/ LINE-1
TAPE/ LINE-2
AUTO DECODE
VIRTUALDIRECT
5CH STEREO
STEREO
D.AUX
T VTV INSOURCE
2,3
A / V
SYSTEM MD
CDR TAPE
TUNER
TV / VCR
IN
/
SURR.
IN
/
SURR.
DVD
Set the remote
control selector
switches to A/V
and IN/SURR..