Denon ADV-M51 Speaker System User Manual


 
ENGLISH
51
Surround parameters (1)
DOLBY VS (Dolby Virtual Speaker mode)
REF (Reference mode)
This is the standard mode.
WIDE (Wide mode)
This mode expands the front channel sound field.
D.COMP. (Dynamic range compression)
This parameter adjusts the dynamic range of the Dolby
Digital or DTS sound. When listening with the volume
turned relatively low, at night for example, set this to the
HI side to lower the peak of the sound and amplify the
quieter sounds, narrowing the dynamic range and making
the sound easier to listen to. Set to OFF to turn this
function off.
With DTS sources, only displayed for sources compatible
with dynamic range compression.
LFE (Low Frequency Effect):
Program source and adjustment range
1. Dolby Digital : 10 dB to 0 dB
2. DTS Surround : 10 dB to 0 dB
When Dolby Digital encoded software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
Dolby Digital playback.
When DTS encoded movie software is played, it is
recommended that the LFE LEVEL be set to 0 dB for correct
DTS playback.
When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set to 10 dB for
correct DTS playback.
Wide
Narrow
OFF LOW MID
HI
Dynamic range
6
Select and set the surround
parameters.
(On the remote control unit, use the
0, 1 cursor buttons to set the
parameters.)
If nothing is done for 6 seconds
from when the parameter is
displayed, the normal display
reappears.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
B Setting the DOLBY VS mode
VS REF WIDE
The selected mode flashes.
The mode is not displayed if it cannot be selected.
B D.COMP. setting
B Setting the LFE level
The LFE level can be adjusted in steps of 1 dB between
10 dB and 0 dB.
B DEFAULT setting
When YES is selected, the settings are restored to the
factory defaults.
When the surround parameters are displayed, use the
and ª
cursor buttons on the remote control unit to switch to previous or
following items.
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
OFF LOW MID HI
,/
,/
-10 -5 0
... ...
YES NO
,/
D.COMP. OFF
LFE 0dB
DEFAULT Y/N