Denon ADV-M51 Speaker System User Manual


 
82
ENGLISH
Example 1: Listening to preset station 3 (FM 92.5 MHz) from p.m.12:35 to p.m.12:56 with the everyday timer
BAND
PHONES
VOLUME
O
N
/
S
TANDB
Y
DVD
SU
RR
OU
ND RE
C
EIVER ADV-M51
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
1,18
2,3,4,6,8
,
10,12,14,16
3,5,7,9,11,
13,15,17
(2) Setting the everyday timer and once timer
2 Be sure to set the current time before setting the timer. (See page 81.)
2 Use the everyday timer to switch the power on and off (standby) once at the same time each day.
Use the once timer to switch the power on and off (standby) at the specified time once only.
2 With the ADV-M51 it is possible to play the tuner, a DVD or a CD with the timer.
2 It is possible to play a DVD, CD, tape, the tuner, MD or the device connected to the AUX terminals with the timer and to record the tuner or
the device connected to the AUX terminals onto an MD recorder or cassette deck using the timer.
Timer playback is not possible for some DVDs. (Most DVDs stop at the menu screen.)
1
Turn on the power.
2
Press the MENU/SET button to display TIMER.
MENU/SET
Main unit
3
Turn the SURROUND/SELECT knob to display EVERYDAY,
then press the MENU/SET button.
The display switches as follows
each time the SURROUND/SELECT
knob is turned:
TIMER
EVERYDAY
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
4
Press the MENU/SET button.
E FUNC
MENU/SET
Main unit
ON / STANDBY
Main unit
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
MENU/SET
Main unit
5
Turn the SURROUND/SELECT knob and set the function to
TUNER.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
E TUNER
The function switches as shown below each time the
surround button is pressed.
Functions marked * differ according to whether LINE-
1 or LINE-2 is set.
DVD TUNER (LINE1)
(LINE2)
(LINE1)
TU
AUX
(LINE1 2)
TU
(LINE2)
*
*
*
*
*
:Clockwise turn
:Counterclockwise turn
6
Press the MENU/SET button.
MENU/SET
Main unit
7
Turn the SURROUND/SELECT knob and select preset number
P03.
P03 FM 92.50M
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
8
Press the MENU/SET button.
The data for the selected station is stored in the memory
and the unit is set to the timer start time setting mode.
•“E and on are displayed.
E on AM12:00
MENU/SET
Main unit
9
<Setting the timer start time>
Turn the SURROUND/SELECT knob to set the hours place to
PM12.
E on PM12:00
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
or