Denon ADV-M51 Speaker System User Manual


 
ENGLISH
46
BAND
PHONES
VOLUME
O
N
/
S
TANDB
Y
DVD
SU
RR
OU
ND RE
C
EIVER
ADV-M51
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
2
1
3
STAT U S
RETURN
SETUP TONE /SDB
ENTER
MUTING
DISPLAY MENU
TOP MENU
SURROUND
PARAMETER
CH SELECT
-
+
VCR CH
1
2
A / V
3
STAT U S
RETURN
ANGLE AUDIO
SUB TITLE
SETUP TONE /SDB
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
ENTER
MUTING
DISPLAY MENU
TOP MENU
SYSTEM MD
CDR TAPE
TUNERTV / VCR
SURROUND
PARAMETER
CH SELECT
-
+
VCR CH
IN
/
SURR.
IN
/
SURR.
DVD
9
8
21
76
+
-
1
After starting playback
[1] Adjusting the sound quality (TONE/SDB)
The TONE/SDB function will not work in the direct mode.
[2] Turning the sound off temporarily (MUTING)
1
Press the TONE/SDB button.
The tone switches as follows each time the TONE/SDB
button is pressed.
DEFEAT
The signals do not pass through the SDB, bass and treble
adjustment circuits, providing higher quality sound.
SDB
Either turn the FUNCTION / SELECT dial or use the (
0,
1 ) cursor buttons to select ON or OFF.
BASS, TREBLE
To increase the bass or treble: Turn the control clockwise or
press the cursor button. (The bass or treble sound can be
increased to up to +10 dB in steps of 2 dB.)
To decrease the bass or treble: Turn the control clockwise
or press the cursor button. (The bass or treble sound can be
decreased to up to 10 dB in steps of 2 dB.)
When TONE/SDB is displayed, the item can be switched
using the
and ª buttons on the remote control unit.
If no operation is performed within 4 seconds, the display
switches back to what was previously displayed.
TONE/SDB
TONE /SDB
1
Use this to turn off the audio output temporarily.
Press the MUTING button.
Cancelling MUTING mode.
Press the MUTING button again.
MUTING
DEFEAT SDB
(ON/OFF)
BASS TREBLE
Main unit Remote control unit
Remote control unit
2
With the name of the volume to be adjusted selected, turn
the SURROUND/SELECT knob or cursor button ( 0, 1 ) to
adjust the level.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit Remote control unit
NOTES:
The mute mode is canceled when the main units main volume
control or one of the main volume control buttons on the remote
control unit is operated.
The setting is canceled if the sets power is turned off.