Denon ADV-M51 Speaker System User Manual


 
ENGLISH
52
[2]2-channel mode settings
When 2-channel signals are input, one of two playback modes can be selected and set according to the 2-channel mode setting, Virtual 1 or
Virtual 2. (The Virtual 1 mode is set by factory default.)
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic II Cinema processing.
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic processing.
BAND
PHONES
VOLUME
O
N
/
S
TANDB
Y
DVD
SU
RR
OU
ND RE
C
EIVER
ADV-M51
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
1,2,3
RC-936
A / V
3
STAT U S
RETURN
ANGLE AUDIO
SUB TITLE
SETUP TONE /SDB
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
ENTER
MUTING
0
DISPLAY MENU
TOP MENU
SYSTEM MD
CDR TAPE
TUNERTV / VCR
SURROUND
PARAMETER
CH SELECT
-
+
VCR CH
IN
/
SURR.
IN
/
SURR.
DVD
9
8
21
76
+
-
1
3
2
NOTES:
The 2-channel mode cannot be set when Dolby Digital or DTS
5.1-channel signals.
The 2-channel mode is set and stored in the memory individually
for the different functions.
1
Set the surround mode to DOLBY VIRTUAL SPEAKER
(DOLBY VS).
The normal display reappears after the surround mode is
displayed.
SURROUND/ SELECT
PUSH
-
PARAM.
SURROUND
Main unit Remote control unit
2
Press the SURROUND PARAMETER
button and select the 2-channel
mode.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
2 VIRTUAL 1
This can be selected if there is no
digital input signal, if the digital
input is a PCM or Dolby Digital 2-
channel signal and if the input is
analog.
SURROUND
PARAMETER
Remote control unit
3
Turn the SURROUND/SELECT control on the main unit or use
the
0
and
1 cursor buttons on the remote control unit to
select the desired 2-channel mode.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit Remote control unit
VIRTUAL 1 VIRTUAL 2
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered