Denon ADV-M51 Speaker System User Manual


 
ENGLISH
38
7
Press the ENTER button to enter the
settings.
The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
To cancel the settings after the adjustments have been made
Display the channel level adjustment screen, then use the
, ª,
0
and
1 cursor buttons to select Level Clear and select Yes.
The level settings for all the speakers are set to 0 dB.
NOTE:
When the channel levels are adjusted at the channel level settings,
the adjusted values are applied to all playback modes.
[4] DVD Auto Power Off setting
The ADV-M51 is equipped with a function for automatically setting
the power to the standby mode if no operation is performed for 30
minutes when the function is set to DVD. Here set whether to use
this function or not.
By factory default this is set to No.
1
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 34.
2
At the system setting changing menu screen, use the
0
and
1 cursor buttons to select DVD AUTO POWER OFF, then
press the ENTER button.
The DVD auto power off setting screen appears.
FINISH : ENTER BUTTON
SELECT :
AUTO POWER OFF YES
NO
(DVD FUNCTION ONLY)
DVD AUTO POWER OFF
ENTER
Remote control unit Remote control unit
3
Use the
0
and
1 cursor buttons to select the Auto Power
Off mode.
B Yes: The function for automatically turning the power off
when the function is set to DVD is activated.
B No: The auto power off function is not activated.
4
Press the ENTER button to enter the
settings.
The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
3
Use the
and ª cursor buttons to select the item to be set,
then use the
0
and
1 cursor buttons to make the settings.
B LINE-1 Function name selection (MD by default)
MD
CD-R
AUX
MD/CD-R
B LINE-2 Function name selection (TAPE by default)
TAPE D.AUXAUX
B LINE-1/LINE-2 REC OUT
: Set whether to turn the recording output during playback in
the Dolby Virtual Speaker mode when the function set to
DVD or the D.AUX exclusive digital input on or off.
On : The signals are output in stereo. (Factory default)
Off : The signals are not output. (Recording is not
possible.)
[5] Function settings
Set the LINE-1 and LINE-2 function names and turn the analog
recording output (REC OUT) on or off.
When used in combination with the D-M31 series, set according to
the components being used and make system connections for
convenient system functions.
It is also possible to assign the D.AUX digital input to LINE-2.
1
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 34.
2
At the system setting changing menu screen, use the
0
and
1 cursor buttons to select FUNCTION ASSIGNMENT, then
press the ENTER button.
The input function setting screen appears.
SELECT :
FINISH : ENTER BUTTON
OFF
FUNCTION ASSIGNMENT
ON
LINE-1
LINE-2
LINE-1/LINE-2 REC OUT
MD
TAPE
ENTER
Remote control unit Remote control unit