Denon ADV-M51 Speaker System User Manual


 
ENGLISH
40
2
Set discs in the disc tray with the labeled (printed) side facing up.
8 cm disc guide
Disc tray
NOTE:
Do not move the this unit while a disc is playing. Doing so
may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
Disc tray
OPEN/CLOSE button
NOTES:
Even when the power is in the standby mode, when the
OPEN/CLOSE button is pressed, the ADV-M51s power turns
on and the disc tray operates. (Auto power on function)
Even if the function is set to something other than DVD,
when the OPEN/CLOSE button is pressed, the function
switches to DVD and the disc tray operates. (Auto function
select function)
Do not strike on the button with a pencil, etc.
12 cm disc guide
(2) Loading Discs
Pick up the disc carefully so as not to touch the signal surface and
hold it with the labeled side facing up.
With the disc tray fully open, set the disc in the disc tray.
Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the
inner tray guide (Figure 2).
Press the OPEN/CLOSE button. The disc is automatically loaded.
The disc tray can also be closed automatically to load the disc by
pressing the PLAY button.
Figure 2
Inner disc tray
8 cm disc
NOTES:
If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray will
open.
Do not press the disc tray in by hand when the power is off.
Doing so will damage it.
Do not place foreign objects in the disc tray. Doing so will
damage it.
(2) Loading Disc
(3) Selecting the video output
Factory default: interlace, 525i.
When a TV compatible with progressive 525p inputs is connected,
the setting can be switched using the operation described below.
1
With the function set to DVD, press the MENU/SET
button for at least 2 seconds.
The current setting (INTERLACED or PROGRESSIVE)
is displayed after VIDEO OUT.
2
Turn the surround/select control while the setting is
displayed to switch it.
The setting switches alternately between INTERLACED
and PROGRESSIVE.
The normal display reappears if no operation is performed
for several seconds.
NOTE:
When PROGRESSIVE is set, no video signals are output
from the VIDEO OUT or S-VIDEO OUT terminals. Set
INTERLACED if you want to use the VIDEO OUT or S-
VIDEO OUT signals.
MENU/SET
Main unit
Figure 1
Outer disc tray
12 cm disc
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit