Denon ADV-M51 Speaker System User Manual


 
107
ENGLISH
Symptom PageCheck
DVD operation
Playback does not start when PLAY
button is pressed.
Playback stops immediately.
8
9
Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.)
Discs other than DVDs, video CDs and music CDs cannot be played.
Disc is dirty. Wipe off the dirt.
Menu playback of video CDs is not
possible.
Menu playback is not possible with anything but video CDs with playback control.
Picture is disturbed during the search
operation.
Some disturbance is normal.
Buttons do not operate. 42 Some operations are disabled for some discs.
No subtitles are displayed.
89, 90
Subtitles are not displayed for DVDs not containing subtitles.
Subtitles are turned off. Turn the subtitles setting on.
Audio (or subtitle) language does not
switch.
89
89
The audio (or subtitle) language does not switch for discs which do not include multiple audio
(or subtitle) languages.
For some discs the audio (or subtitle) language cannot be switched when the operation to
switch it is performed, but can be switched on the menu screens.
Angle does not switch.
77 The angle cannot be switched for DVDs which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
Playback does not start when the title is
selected.
97, 98 Check the RATINGS SETUP setting.
The password for rating level has been
forgotten.
Reset all the DVD setting to Factory
Preset.
97, 98 While the player is in the stop mode, hold the FUNCTION button and the MENU/SET button
down simultaneously for longer than 3 seconds (until INITIALIZE disappears from the TV
monitor).
The lock will be released and the DVD all default settings and picture settings will return to the
default values.
The disc is not played with the audio or
subtitle language set as the default
setting.
89 The disc does not play with the selected audio or subtitle language if that audio or subtitle
language is not included on that DVD.
Picture is not displayed in 4:3 (or 16:9). 93 Set the TV ASPECT default setting to the proper setting for the connected TV.
Menu screen messages for the desired
language do not display.
90, 91 Check the default setting for the disc languages menu language.
Continuous noise is heard when receiving
FM programs
Antenna cable is not properly connected. Connect the antenna cable properly.
Connect an outdoor antenna.
14
Hissing or continuous noise is heard when
receiving AM programs
This may be noise from a TV or interference
from a radio station.
Turn off the TV.
Change the position and direction of the AM
loop antenna.
14
Humming noise is heard when receiving
AM programs
The radio waves transmitted over the
power cord are being modulated.
Unplug the power cord, flip the plug over in
the opposite direction, then plug the cord
back in.
14
Tuner
Active subwoofer
LED does not light and no sound is
produced when power is turned on.
Check the connection of the AC power plug.
LED lights but no sound is produced.
Connect securely.
Turn the control and set it to the desired position.
LED flashes and no sound is produced.
Set the power switch to the OFF position, wait at least 1 minute, then set the power switch
back to the ON position. If the problem persists, unplug the AC power cord from the AC
power outlet and contact your store of purchase.
Sound is distorted.
Turn the volume adjustment control counterclockwise to lower the volume.
Do not amplify the bass sound on the amplifier. (Lower the amplifiers bass adjustment control
or volume.)
Oscillation (loud continuous sound
produced).
Lower the volume of the active subwoofer or amplifier.
10
22
22
22
22