Filter
Top Products
ENGLISH
WARNING:
• When installing the speaker systems on the ceiling or wall, to
ensure safety, have specialists do the installation work.
• Be sure to fasten the speaker cords to a wall, etc., to prevent
people from tripping over them or otherwise pulling on them
accidentally, causing the speaker systems to fall.
• Be sure to check for safety after installing the speaker systems.
Afterwards, perform safety inspections at regular intervals to be
sure there is no danger that the speaker systems will fall. Denon
will accept no responsibility for damages or accidents caused by
inappropriate choice of the place of installation or improper
installation procedures.
• For your safety, do not put anything nor lean yourself
on the loudspeakers.
• Do not push the loudspeaker from aside to protect it
from topping that may cause serious accident.
• Fix speaker cables to prevent being caught on it and making
loudspeakers topping down.
3
CAUTIONS ON HANDLING
• Switching the input function when input jacks are not
connected
A clicking noise may be produced if the input function is switched
when nothing is connected to the input jacks. If this happens, either
turn down the MASTER VOLUME control or connect components
to the input jacks.
• Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER
terminals
The PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals
include a muting circuit. Because of this, the output signals are
greatly reduced for several seconds after the power switch is
turned on or input function, surround mode or any other-set-up is
changed. If the volume is turned up during this time, the output will
be very high after the muting circuit stops functioning. Always wait
until the muting circuit turns off before adjusting the volume.
(1) DVD SURROUND RECEIVER
• Whenever the power switch is in the STANDBY state, the
apparatus is still connected on AC line voltage.
Please be sure to unplug the cord when you leave home for,
say, a vacation.
2 SC-A3L
• Note that color blotching may occur on a TV, etc., due to interaction
with the speaker system if there is a magnet or an object
generating magnetic force nearby.
Examples: (a) When there are magnets on the door of the rack,
stand, etc.
(b) When a health device, etc., equipped with magnets
is placed nearby.
(c) When toys or other objects using magnets are
placed nearby.
• Note that the illustrations in this instructions may differ from the
actual set for explanation purposes.
• Be sure to keep the operating instructions.
After reading these operating instructions, store them in a safe
place. We also recommend filling in the necessary items on the
back cover.
2 DSW-3L
• The built-in amplifier of the active subwoofer (DSW-3L) includes a
muting circuit. The output signal is strongly attenuated for several
seconds after the power is turned on. If the volume is adjusted
during this time, the output may be extremely high when the
muting circuit is deactivated. Be sure to wait for the muting circuit
to be deactivated before adjusting the volume.
• Note that color blotching may occur on a TV, etc., due to interaction
with the subwoofer if there is a magnet or an object generating
magnetic force nearby.
Examples: (a) When there are magnets on the door of the rack,
stand, etc.
(b) When a health device, etc., equipped with magnets
is placed nearby.
(c) When toys or other objects using magnets are
placed nearby.
• Note that the illustrations in this instructions may differ from the
actual set for explanation purposes.
• Be sure to keep the operating instructions.
After reading these operating instructions, store them in a safe
place. We also recommend filling in the necessary items on the
back cover.
(2) SPEAKER SYSTEM (D-M51DVS only)
WARNING:
• Be sure to fasten the power cord to a wall, etc., to prevent
people from tripping over it or otherwise pulling on it
accidentally, causing the subwoofer to fall.
6