Filter
Top Products
0
Getting Started Connections Setup Playback Multi-Zone Information Troubleshooting
ENGLISH
[SOURCE
CONTROL 1]
[1], [2],
[3], [0],
[6 7],
[8 9]
[SOURCE
CONTROL 2]
Sub Remote Control Unit
(RC-1108)
The sub remote control unit (RC-1108) included with the AVR-1709
can be used as the exclusive multi-zone remote control unit.
b The following describes operation for the selected zone.
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner
• Operating an iPod (Note that [FAVORITES DIRECT PLAY] can
only be used with the ASD-3N/3W.)
[POWER OFF]
[SOURCE SELECT]
[TUNING +, –]
[8], [9]
[1/3], [2]
[CHANNEL +, –]
[REPEAT]
[POWER ON]
[VOLUME +, –]
[FAVORITES
DIRECT PLAY]
[MUTE]
[SHIFT]
[RANDOM]
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input source
VOLUME +, – Volume control
CHANNEL +, – Channel + / –
TUNING +, – Tuning + / –
MUTE Muting
SHIFT Switching the memory block
8 9
Auto search (cue)
2
Stop
1/3
Play / Pause
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a control dock for iPod (ASD-1R), the [FAVORITES
DIRECT PLAY] cannot be used.
1
Set [SOURCE CONTROL 1] to “VIDEO”.
2
Set [SOURCE CONTROL 2] to the component to be
registered (SAT/CABLE or TV).
3
Press [MEMORY] and [RETURN] at the same time.
The indicator starts flashing.
4
Input the number of the component you want to set.
No.
CD 1
iPod/NETWORK 2
TUNER 3
DVD/VDP 4
VCR 5
No setting 0
Punch Through Function
“Punch Through” is a function allowing you to operate 1, 2, 3, 0,
6, 7, 8 and 9 on CD, iPod/NETWORK, TUNER, DVD/
VDP or VCR components when in the SAT/CABLE or TV mode. By
default, nothing is set.
[NUMBER]
[RETURN]
[MEMORY]
[Front]
[Rear]
Remote Control