Filter
Top Products
Information
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using <STATUS>.
OFFSET -4dB
The fi gure is the correction value when the standard level is
corrected.
• The items displayed will differ depending upon the current settings,
the presence or absence of an input signal or the type of input signal,
etc.
• For details of the content of the items displayed, refer to the page
containing an explanation of the settings.
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press <STATUS>.
The information is displayed for several seconds before the display
returns to its original condition.
[Items to be checked]
• Surround Mode
• Input signal
• Dialogue normalization
• Input function
• Input digital terminal
• Audio Delay
• Tone Control
• Channel level of each speaker
• CINEMA EQ
• Night Mode
etc.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
<STATUS>
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual