Filter
Top Products
Input signal
Display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
DIRECT
For details, see page 61.
e Direct Playback
r Stereo Playback
Selecting the mode
Select by turning <SELECT/ENTER> or pressing [D/ST].
[Selectable items]
STEREO
:
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
Selecting the mode
Select by turning <SELECT/ENTER> or pressing [D/ST].
[Selectable items]
DIRECT
:
In this mode the signals bypass the tone adjustment circuitry for high
quality sound.
The sound is output to the same channels as the input signal.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
w DSP Simulation Playback
The desired mode according to the program source and viewing
situation can be selected from among 7 DENON original surround
modes.
The surround parameters can be adjusted (vpage 58, 59) to
achieve an even more realistic, powerful sound field.
Selecting the surround mode
Select by turning <SELECT/ENTER> or pressing [SIMU].
[Selectable items]
5CH / 7CH STEREO
z1
: This mode is for enjoying stereo sound
from all speakers.
ROCK ARENA
: This mode is for enjoying the atmosphere
of a live concert in an arena.
JAZZ CLUB
: This mode is for enjoying the atmosphere
of a live concert in a jazz club.
MONO MOVIE
z2
: This mode is for playing monaural movie
sources with surround sound.
VIDEO GAME
: This mode is suited for achieving surround
sound with video games.
MATRIX
: This mode lets you add a sense of expansion
to stereo music sources.
VIRTUAL
: This mode is for enjoying surround
effects using only the front speakers or
headphones.
z1: “5CH STEREO” is displayed when “Surround Parameter” – “SB
CH Out” is set to “OFF”, and “Amp Assign” is set to “ZONE2”
(vpage 35).
z2: When playing sources recorded in monaural in the MONO MOVIE
mode, the sound will be off balance with a single channel (left or
right), so input to both channels.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH