Filter
Top Products
Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Select the terminal to use and connect the device (vpage 8 “Video Conversion Function”).
47*%&0
*/
7*%&0
$0.10/&/57*%&0
: 1# 13
7*%&0
*/
)%.*
*/ */
47*%&0
065
"6%*0 7*%&0
$0.10/&/57*%&0
: 1# 13
7*%&0
065065
"6%*0
3-
065 065
)%.*
065
$0"9*"-
R
L
R
L
Monitor
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
DVD Player
Select the terminal to use and connect the device.
DVD player
NOTE
• Video/S-Video or Component Video connections are required to playback analog video devices
on TV monitor.
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor’s operating instructions.
• To play the sound by AVR-1709, make analog or digital audio output connections to AVR-1709’s audio
input connectors.
• The signals output from the HDMI connectors are only the HDMI input signals.
• The same method can be used to connect an HDP (High-Definition Player) such as a Blu-ray Disc
player.
• When using a optical cable for the digital audio connection, make the settings at “System Setup” – “Input
Setup” – “Digital In Assign” (vpage 26).
Connections
Connecting the Monitor Connecting the Playback Components
NOTE
The audio signal input to
the HDMI input connector
cannot be played on the
AVR-1709. Input the audio
signal to the digital audio
input connector or analog
audio input connector.