Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Setup
For details on how to select, set and cancel settings for each menu, see “System setup operation” (vpage 22).
s ~ f Volume Control
Set the main zone volume setting.
f Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
s Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
d Power On Level
This sets the volume set when the main zone’s power is turned on.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
[Variable range]
–80dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
b
The variable level when upper limit has been set with “Volume
Limit” is “–80 dB ~ the set volume level”.
3. Option Setup
Make various other settings.
a Amp Assign
s ~ f Volume Control
g ~ j ZONE2 Volume Control
k ~ A4 2ch Direct/Stereo Custom
A5 Auto Surround Mode
A6 Direct Mode Setup
A7 Remote ID Setup
a Amp Assign
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible
to output sound to rooms other than the room (the main zone)
where surround playback is performed (multi-zone playback) or
play the sound with high quality using the front speakers (bi-amp
connections).
[Selectable items]
7.1ch
: 7.1-channel playback
ZONE2
: 5.1-channel playback + ZONE2 stereo playback
FrontA
: Bi-amp (5.1-channel playback)
FrontB
: Bi-amp (5.1-channel playback)
For details, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 51 ~ 53).
g ~ j ZONE2 Volume Control
Set the ZONE2 volume setting.
g ZONE2 Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
1 Amp ZONE2
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
2 Limit OFF
E
3 P.On LAST
E
4 Mute FULL
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
5 Z2Limit:OFF
E
6 Z2 P.On: Last
E
7 Z2 Mute:FULL