Denon POA-A1HDCI Stereo Amplifier User Manual


 
1
Connect the HDMI to the AVP-A1HDCI with
equipment compatible with the HDMI control
function.
2
Put the power on for all the equipment connected to
the HDMI.
3
Check the settings for all the equipment connected to
the HDMI and make HDMI available to them.
b Please consult the operating instructions for the connected
equipment to check the settings.
b Operations 1 ~ 3 do not have to be repeated once started.
b Carryout Operations 2 and 3 should any of the equipment be
plugged out.
4
Switch the television input to the HDMI connected to
the AVP-A1HDCI.
5
Switch the AVP-A1HDCI input to the HDMI input
source and check if the picture from the player is ok.
6
Put the television power on standby and check if the
AVP-A1HDCI goes into standby.
If the AVP-A1HDCI does not work please check the following.
• Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
– “Control” (vpage 32) set to “ON”?
• Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
“Control Monitor” (vpage 32) set for the monitor output
connected to television?
• Is the GUI menu “Manual Setup” – “HDMI Setup” – “HDMI Control”
– “Power Off Control” (vpage 32) set to “ON”?
• Is the control function used for the television HDMI properly set?
(Check the television operating instructions for details.)
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat Operation's 2 and 3.
GUI menu “Source Select” – (input source) – “Assign” – “HDMI”
(vpage 46) setting has changed
There is a change to the connection between the equipment and
the HDMI, or an increase in equipment.
Change of HDMI monitor output in AVP-A1HDCI setup.
Operations
CH SELECT
<POWER>
<STANDARD>
<HOME THX CINEMA>
QUICK SELECT
uiop
uiop
CH SELECT
QUICK SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
AVPA1HDCIEU_0121.indd 74 2008/01/21 12:50:01