Filter
Top Products
B. SPECIFICATIONS.
Operating 12.8 Vrms Max
Voltage
Impedence 11 Ohm
Power Input 15 W Max
Weight 15 lb. (6.8 kg)
(approx.)
Size 14.75" (375mm) long, 14.75" (375mm) high,
8.875" (225mm) wide.
Construction Aluminum enclosure and adjustable
steel mounting bracket painted with
grey enamel.
Approval Agency Listings:
Underwriters Laboratories Inc. Guides UGKZ and UGKZ7
C. INSTALLATION.
1. Unpacking.
After unpacking the speaker, examine it carefully for possible damage that may have
occurred in transit. If equipment has been damaged, immediately file a claim with the carrier
stating the extent of the damage. Carefully check all shipping labels and tags for special
instructions before removing or destroying them.
2. Mounting Arrangements.
The speaker can be mounted on any relatively flat surface. Conduit connection can be made
to the 1/2" threaded opening at bottom of the housing (see figure 1).
WARNING
Property damage, serious injury, or death could occur if an accumulation of water, snow, dust,
etc. resides in the speaker projector, severely
reducing or preventing operation of this device. Mount the unit
so speaker projector is pointed horizontally
or slightly downward.
a. Remove the two 1/2-13 hex head bolts, flat washers and lockwashers that secure
mounting bracket to unit.
b. Select mounting location.
WARNING
Property damage, serious injury, or death could occur if any objects are
in front of speaker, severely reducing optimum sound distribution.
For maximum effectiveness, ensure that the front of
the speaker is clear of obstructions.
c. Using the mounting bracket as a template, scribe drill position marks on the mounting
surface. See figure 1 for mounting hole locations and dimensions.
CAUTION
Before drilling holes in any surface, be sure both sides of surface
are clear of anything that could be damaged.
d. Drill holes at the previously scribed drill position marks to
accommodate 1/2" diameter screws.
-2-