Carver CV Series Stereo Amplifier User Manual


 
Rev 04.08.021 - 9 –
SPECIFICATIONS with Basic input module
PERFORMANCE:
THD: 0.5% at rated power, 0.2% at 1/8 rated power at 1kHz
IMD DIM30 Method: <0.2%
Dynamic Headroom: 1.5dB
Power Bandwidth: 40 Hz to 20 kHz 4 and 8 ohm loads
Frequency Response: 26 Hz to 20 kHz +0.5, -3 dB 4 and 8 ohm loads
Signal-to-Noise 94dB (typical), A-Weighted, referred to rated power
Crosstalk: -60dB, full bandwidth
CMRR: 75dB @ 1kHz
Slew Rate: 7V/µSec
Sensitivity for rated power (includes EFX Inputs): 0dB or 0.775V
rms
Input Impedance (includes EFX Inputs): 50k balanced
Input Overload (includes EFX Inputs): 20dBu
Protection: Thermal, Short Circuit, and Over-current & Over Voltage
Stability: Unconditionally stable into reactive loads
Duty Cycle: Continuous operation at 1/3 rated power
POWER REQUIREMENTS:
Mains Voltage (output power rated at nominal voltage): 100VAC, 50-60Hz ±20%
120VAC, 60Hz ±20%
230VAC, 50Hz ±20%
Power Consumption (See Appendix A)
REGULATORY COMPLIANCE:
Proposed ETL/C Mark to: UL6500, 2
nd
Edition
CE Certification to: EN55103-1 & EN55103-2
PHYSICAL:
Cooling Method: Convection
Operating Environment: -10
o
C to 55
o
C, up to 85% RH
Storage Environment: -45
o
C to 70
o
C, up to 93% RH
Dimensions: 5.25” H (2U) x 19.0” W x 17.25” D
133mm x 483mm x 438mm
Net Weight: CV4002 – 54.0lbs. / 24.5kg
Shipping Weight: CV4002 – 60.0lbs. / 27.3kg