Filter
Top Products
Rev 04.08.021 - 7 –
SPECIFICATIONS with Basic input module
PERFORMANCE:
• THD: 0.5% at rated power, 0.2% at 1/8 rated power at 1kHz
•
••
• IMD DIM30 Method: <0.2%
•
••
• Dynamic Headroom: 1.5dB
•
••
• Power Bandwidth: 40 Hz to @20 kHz +0.5, -3 dB
•
••
• Frequency Response: 26 Hz to 20 kHz, 4 and 8 ohm loads
•
••
• Signal-to-Noise 94dB (typical), A-Weighted, referred to rated power
•
••
• Crosstalk: -60dB, full bandwidth
•
••
• CMRR: 75dB at 1kHz
•
••
• Slew Rate: 7V/µSec
•
••
• Sensitivity for rated power (includes EFX Inputs): 0dB or 0.775V
rms
•
••
• Input Impedance (includes EFX Inputs): 50k balanced
•
••
• Input Overload (includes EFX Inputs): 20dBu
•
••
• Protection: Thermal, Short Circuit, and Over-current & Over Voltage
•
••
• Stability: Unconditionally stable into reactive loads
•
••
• Duty Cycle: Continuous operation at 1/3 rated power
POWER REQUIREMENTS:
•
••
• Mains Voltage (output power rated at nominal voltage): 100VAC, 50-60Hz ±20%
120VAC, 60Hz ±20%
230VAC, 50Hz ±20%
• Power Consumption (See Appendix A)
REGULATORY COMPLIANCE:
•
••
• Proposed ETL/C Mark to: UL6500, 2
nd
Edition
•
••
• CE Certification to: EN55103-1 & EN55103-2
PHYSICAL:
•
••
• Cooling Method: Convection
•
••
• Operating Environment: -10
o
C to 55
o
C, up to 85% RH
•
••
• Storage Environment: -45
o
C to 70
o
C, up to 93% RH
•
••
• Dimensions: 3.5” H (2U) x 19.0” W x 17.25” D
89mm x 483mm x 438mm
•
••
• Net Weight: CV1502 – 35.1lbs / 15.9kg
CV2502 – 42.5lbs / 19.3kg
•
••
• Shipping Weight: CV1502 – 41.0lbs. / 18.0kg
CV2502 – 48.0lbs. / 22.0kg