Carver CV Series Stereo Amplifier User Manual


 
Rev 04.08.021 - 5 –
SPECIFICATIONS with Basic input module
PERFORMANCE:
THD: <0.5% @ rated power, 0.2% 1/8 rated power at1 kHz
IMD DIM30 Method: <0.2%
Dynamic Headroom: 1.5dB
Power Bandwidth: 40 Hz to 20 kHz, 4 and 8 ohm loads
Frequency Response: 30 Hz to 20 kHz +0.5, -3dB(4 and 8 ohm loads)
Signal-to-Noise: 94dB (typical), A-weighted, referred to rated power
CMRR: 75dB at 1kHz
Slew Rate: 7V/µSec
Sensitivity for rated power (includes EFX Inputs): 0dBu or 0.775 V
rms
Input Impedance (includes EFX Inputs): 50k balanced
Input Overload (includes EFX Inputs): 20 dBu
Protection: Thermal, Short Circuit, Over-current & Over Voltage, self-resetting
Stability: Unconditionally stable into reactive loads
Duty Cycle: Continuous operation with dynamic signal at 1/3rd power
POWER REQUIREMENTS:
Mains Voltage (output power rated at nominal voltage): 100VAC, 50-60Hz ±20%
120VAC, 60Hz ±20%
230VAC, 50Hz ±20%
Power Consumption (See Appendix A)
REGULATORY COMPLIANCE:
Proposed ETL/C Mark to: UL6500, 2
nd
Edition
CE Certification to: EN55103-1 & EN55103-2
PHYSICAL:
Cooling Method: Convection
Operating Environment: -10
o
C to 55
o
C, up to 85% RH
Storage Environment: -45
o
C to 70
o
C, up to 93% RH
Dimensions: 3.5” H (2U) x 19.0” W x 16” D
89mm x 483mm x 438mm
Net Weight: CV1501 – 27.4lbs / 12.4kg
CV2501 32.7lbs / 14.9kg
Shipping Weight: CV1501 – 32.9lbs. / 15.0kg
CV2501 38.2lbs. / 17.4kg