Filter
Top Products
Rev 04.08.021 - 8 –
CV4002
Power Output
• 400W per channel into 4 ohm and 8 ohm loads, autoformer coupled,
40Hz to 20kHz ±3dBwith < 0.5% THD at full power
• 400W per channel, transformer coupled @ 25V, 35V, 50V, 70V and 100V,
40Hz to 18kHz ±3dB with < 0.5% THD at full power
• 800W in parallel mono at 4 Ohms, 800W parallel and bridged mono at 8 and 16 Ohms,
50V, 70V, 100V, 140V and 200V, with no more than 0.5% THD
Common Features
• Convection Cooling
• 5-segment LED level display, per channel,
including signal present and clip indicators
• 3 LED display, per channel, of Power, Protect and
Thermal Overload
• Standby LED indicates the amplifier is in Standby
Mode
• Data LED (used with Computer Control Module)
• Level controls can be covered with a cap
(supplied) to prevent tampering
• Remote control of output level via Euro Style
connector
• Unbalanced Effects Loop (send/receive) via Euro
Style Connector
• Standard Dual Input Module with line level inputs
via Euro Style connectors and XLR jacks,
connected in parallel
• Switched Clip Limiters
• 26Hz High Pass Filters
• Switched 80Hz and 120Hz (12db/Octave cut)
High Pass Filters
• Terminals for Sequencing Power ON/OFF
• Speaker Outputs via large gauge Euro Style
connectors
• Power Switch, 3 positions On, Off, Standby
• AC Line Cord (Detachable IEC Type)
• Optional Accessories:
− Four Input Mixer Module with zone assignment
− Paging Modules with variable ducking
− Expanded Mic/Line Level Input Module
− Computer Control & Monitoring via ION Media
Control Module
− DSP control of 28 Band Graphic EQ, 5 Band
Parametric EQ, HP Filter, LP Filter, Crossover,
Adjustable Limiting and Adjustable Delay via
i
ON Media DSP Tools Module