Filter
Top Products
38 Setup
Keyboard Layout: [Q, F]
This selection is only available when Turkish keyboard is selected. Q and F refer to the
two Turkish keyboard layouts available. Q and F correspond to the top left key on the
alphanumeric keypad.
Margin Bell: [On, Off]
Choose whether a bell tone sounds when the cursor is nine positions away from the
right margin.
Key Lock: [Caps, Reverse, Shift]
Affects the state of alphanumeric keys when Caps-Lock is engaged.
§ Caps causes alphabetic keys to be uppercase regardless of the shift key.
§ Reverse causes the shift key to generate lowercase alphabetic keys.
§ Shift causes all alphanumeric keys to be generated as uppercase (or shifted, in the
case of numbers). If the Shift key is pressed, while Shift is selected, Caps-Lock
will be disengaged.
Caps Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Caps Lock key. When set to always on or always off
the key has no effect. When set to toggle, the terminal will power on in the off mode
and pressing the key will alternate between the off mode and the on mode.
Num Lock: [Toggle, Always On, Always Off]
This setting effects the state of the Num Lock key. When set to always on or always off
the key has no effect. When set to toggle, the terminal will power on in the off mode
and pressing the key will alternate between the off mode and the on mode.
Code Page: [DEC Multi, PC 437, PC 850, PC 852, PC 857, PC 860, PC 861, PC
862, PC 863, PC 865, PC 866, PC 869, ISO-1, ISO-2, ISO-5, ISO-Hebrew,
ISO-Cyrillic, ISO-Greek]
This selection is only available in 8-bit emulations in Multinational Mode. The default
code page is based upon language and emulation selected. To determine which sets are
loaded for each code page, refer to the 3153 Programmer’s Reference Guide.
KEYS: F5
Return Key: [CR, CR-LF, TAB]
Select the code the return key on the main alphanumeric keypad transmits.
Enter Key: [CR, CR-LF, TAB]
Select the code the enter key in the numeric keypad transmits.
Alt Key (left): [Meta, Compose, Funct, Scroll-Lock, Alt Key]
Select the way in which the left ALT key (or the Compose key on the ANSI keyboard)
behaves. The Alt Key selection refers to the right Alt key.
§ Meta – sets the most significant bit for the next character and allows 8-bit data to
be generated from the keyboard.
§ Compose – precedes sequences of keys to create a character that is not on the
keyboard but is available in the active character set.
§ Scroll Lock – causes the Alt key to function as the Scroll Lock key, and is a toggle
to hold/free data on the screen. It requires the use of flow control for the host
port Rcv Prtcl.
§ Funct – causes the Alt key to function as the Funct key on an ASCII keyboard.
§ Alt Key – causes the left Alt key to behave identically to the right Alt key.