Filter
Top Products
27
chapter
3
Setup
The Setup menu is your control panel for this terminal. It permits you to configure the
terminal to communicate with the host computer as well as to suit your personal
preferences.
Overview
The Setup menus have been designed to allow maximum flexibility with a minimum
investment of time. Thirteen menus provide you with the flexibility and the features
below contribute to ease of use:
§ The Quick menu is the first screen upon entry. It contains the parameters critical
to the operation of the terminal with the host.
§ Function keys permit easy access to any menu. The function keys are labeled at
the top of every menu.
§ Setup is “smart.” That is, it provides only the options that are valid for the
hardware and current emulation.
§ Keystrokes and Help Messages are at the bottom of every menu.
§ Valid choices for the selected parameter are displayed at the bottom of the menu.
Entry and Exit
PC-Style Keyboards: Press Ctrl-Scroll Lock to both enter and exit setup. Also,
press Esc or Pause to exit.
IBM 3151 emulation: Press Ctrl-Setup to both enter and exit setup.
ANSI Keyboard: entry is dependent upon the Setup selections:
§ When “F1 to F5 keys” = Local, press F3 to enter.
§ When “F1 to F5 keys” = FKey, press Ctrl-F3 to enter.
§ When “Key Mode” = Scan Code, press Ctrl-Select to enter.